Transport Layer Security (TLS) and its predecessor, Secure Sockets Layer (SSL), are cryptographic protocols that provide communication security over the Internet.^[1] TLS and SSL encrypt the segments of network connections above the Transport Layer, using asymmetric cryptography for privacy and a keyed message authentication code for message reliability.

Several versions of the protocols are in widespread use in applications such as web browsing, electronic mail, Internet faxing, instant messaging and voice-over-IP (VoIP).

TLS is an IETF standards track protocol, last updated in RFC 5246 and is based on the earlier SSL specifications developed by Netscape Corporation.^[2]

[edit]Description

The TLS protocol allows client/server applications to communicate across a network in a way designed to prevent eavesdropping and tampering.

A TLS client and server negotiate a stateful connection by using a handshaking procedure.^[3] During this handshake, the client and server agree on various parameters used to establish the connection's security.

• The handshake begins when a client connects to a TLS-enabled server requesting a secure connection and presents a list of supported CipherSuites (ciphers and hash functions).
• From this list, the server picks the strongest cipher and hash function that it also supports and notifies the client of the decision.
• The server sends back its identification in the form of a digital certificate. The certificate usually contains the server name, the trusted certificate authority (CA) and the server's public encryption key.
• The client may contact the server that issued the certificate (the trusted CA as above) and confirm the validity of the certificate before proceeding.
• In order to generate the session keys used for the secure connection, the client encrypts a random number with the server's public key and sends the result to the server. Only the server should be able to decrypt it, with its private key.
• From the random number, both parties generate key material for encryption and decryption.

This concludes the handshake and begins the secured connection, which is encrypted and decrypted with the key material until the connection closes.

If any one of the above steps fails, the TLS handshake fails and the connection is not created.

[edit]History and development

[edit]Secure Network Programming API

Early research efforts toward transport layer security included the Secure Network Programming (SNP) application programming interface (API), which in 1993 explored the approach of having a secure transport layer API closely resembling Berkeley sockets, to facilitate retrofitting preexisting network applications with security measures.^[4]

[edit]SSL 1.0, 2.0 and 3.0

The SSL protocol was originally developed by Netscape. Version 1.0 was never publicly released; version 2.0 was released in February 1995 but "contained a number of security flaws which ultimately led to the design of SSL version 3.0" (Rescorla 2001). SSL version 3.0 was released in 1996.

[edit]TLS 1.0 (SSL 3.1)

TLS 1.0 was first defined in RFC 2246 in January 1999 as an upgrade to SSL Version 3.0. As stated in the RFC, "the differences between this protocol and SSL 3.0 are not dramatic, but they are significant enough that TLS 1.0 and SSL 3.0 do not interoperate." TLS 1.0 does include a means by which a TLS implementation can downgrade the connection to SSL 3.0.

[edit]TLS 1.1 (SSL 3.2)

TLS 1.1 was defined in RFC 4346 in April 2006.^[5] It is an update from TLS version 1.0. Significant differences in this version include:

• Added protection against Cipher block chaining (CBC) attacks.
  • The implicit Initialization Vector (IV) was replaced with an explicit IV.
  • Change in handling of padding errors.
• Support for IANA registration of parameters.

[edit]TLS 1.2 (SSL 3.3)

TLS 1.2 was defined in RFC 5246 in August 2008. It is based on the earlier TLS 1.1 specification. Major differences include:

• The MD5-SHA-1 combination in the pseudorandom function (PRF) was replaced with SHA-256, with an option to use cipher-suite specified PRFs.
• The MD5-SHA-1 combination in the Finished message hash was replaced with SHA-256, with an option to use cipher-suite specific hash algorithms.
• The MD5-SHA-1 combination in the digitally-signed element was replaced with a single hash negotiated during handshake, defaults to SHA-1.
• Enhancement in the client's and server's ability to specify which hash and signature algorithms they will accept.
• Expansion of support for authenticated encryption ciphers, used mainly for Galois/Counter Mode (GCM) and CCM mode of Advanced Encryption Standard encryption.
• TLS Extensions definition and Advanced Encryption Standard CipherSuites were added.

[edit]Applications

In applications design, TLS is usually implemented on top of any of the Transport Layer protocols, encapsulating the application-specific protocols such as HTTP, FTP, SMTP, NNTP and XMPP. Historically it has been used primarily with reliable transport protocols such as the Transmission Control Protocol (TCP). However, it has also been implemented with datagram-oriented transport protocols, such as the User Datagram Protocol (UDP) and the Datagram Congestion Control Protocol (DCCP), usage which has been standardized independently using the term Datagram Transport Layer Security (DTLS).

A prominent use of TLS is for securing World Wide Web traffic carried by HTTP to form HTTPS. Notable applications are electronic commerce and asset management. Increasingly, the Simple Mail Transfer Protocol (SMTP) is also protected by TLS. These applications use public key certificates to verify the identity of endpoints.

TLS can also be used to tunnel an entire network stack to create a VPN, as is the case with OpenVPN. Many vendors now marry TLS's encryption and authentication capabilities with authorization. There has also been substantial development since the late 1990s in creating client technology outside of the browser to enable support for client/server applications. When compared against traditional IPsec VPN technologies, TLS has some inherent advantages in firewall and NAT traversal that make it easier to administer for large remote-access populations.

TLS is also a standard method to protect Session Initiation Protocol (SIP) application signalling. TLS can be used to provide authentication and encryption of the SIP signalling associated with VoIP and other SIP-based applications.

[edit]Security

TLS has a variety of security measures:

• Protection against a downgrade of the protocol to a previous (less secure) version or a weaker cipher suite.
• Numbering subsequent Application records with a sequence number and using this sequence number in the message authentication codes (MACs).
• Using a message digest enhanced with a key (so only a key-holder can check the MAC). The HMAC construction used by most TLS cipher suites is specified in RFC 2104 (SSL 3.0 used a different hash-based MAC).
• The message that ends the handshake ("Finished") sends a hash of all the exchanged handshake messages seen by both parties.
• The pseudorandom function splits the input data in half and processes each one with a different hashing algorithm (MD5 and SHA-1), then XORs them together to create the MAC. This provides protection even if one of these algorithms is found to be vulnerable. TLS only.
• SSL 3.0 improved upon SSL 2.0 by adding SHA-1 based ciphers and support for certificate authentication.

From a security standpoint, SSL 3.0 should be considered less desirable than TLS 1.0. The SSL 3.0 cipher suites have a weaker key derivation process; half of the master key that is established is fully dependent on the MD5 hash function, which is not resistant to collisions and is, therefore, not considered secure. Under TLS 1.0, the master key that is established depends on both MD5 and SHA-1 so its derivation process is not currently considered weak. It is for this reason that SSL 3.0 implementations cannot be validated under FIPS 140-2.^[6]

A vulnerability of the renegotiation procedure was discovered in August 2009 that can lead to plaintext injection attacks against SSL 3.0 and all current versions of TLS. For example, it allows an attacker who can hijack an https connection to splice their own requests into the beginning of the conversation the client has with the web server. The attacker can't actually decrypt the client-server communication, so it is different from a typical man-in-the-middle attack. A short-term fix is for web servers to stop allowing renegotiation, which typically will not require other changes unless client certificate authentication is used. To fix the vulnerability, a renegotiation indication extension was proposed for TLS. It will require the client and server to include and verify information about previous handshakes in any renegotiation handshakes.^[7] When a user doesn't pay attention to their browser's indication that the session is secure (typically a padlock icon), the vulnerability can be turned into a true man-in-the-middle attack.^[8] This extension has become a proposed standard and has been assigned the number RFC 5746. The RFC has been implemented in recent OpenSSL^[9] and other libraries ^[10] [11].

There are some attacks against the implementation rather than the protocol itself:^[12]

• In the earlier implementations, some CAs^[13] did not explicitly set basicConstraints CA=FALSE for leaf nodes. As a result, these leaf nodes could sign rogue certificates. In addition, some early software (including IE6 and Konqueror) did not check this field altogether. This can be exploited for man-in-the-middle attack on all potential SSL connections.
• Some implementations (including older versions of Microsoft Cryptographic API, Network Security Services and GnuTLS) stop reading any characters that follow the null character in the name field of the certificate, which can be exploited to fool the client into reading the certificate as if it were one that came from the authentic site, e.g. paypal.com\0.badguy.com would be mistaken as the site of paypal.com rather than badguy.com.
• Browsers implemented SSL/TLS protocol version fallback mechanisms for compatibility reasons. The protection offered by the SSL/TLS protocols against a downgrade to a previous version by an active MITM attack can be rendered useless by such mechanisms.^[14]

SSL 2.0 is flawed in a variety of ways:^{[citation needed]}

• Identical cryptographic keys are used for message authentication and encryption.
• SSL 2.0 has a weak MAC construction that uses the MD5 hash function with a secret prefix, making it vulnerable to length extension attacks.
• SSL 2.0 does not have any protection for the handshake, meaning a man-in-the-middle downgrade attack can go undetected.
• SSL 2.0 uses the TCP connection close to indicate the end of data. This means that truncation attacks are possible: the attacker simply forges a TCP FIN, leaving the recipient unaware of an illegitimate end of data message (SSL 3.0 fixes this problem by having an explicit closure alert).
• SSL 2.0 assumes a single service and a fixed domain certificate, which clashes with the standard feature of virtual hosting in Web servers. This means that most websites are practically impaired from using SSL. TLS/SNI fixes this and has been deployed in all common Web servers except IIS.

SSL 2.0 is disabled by default in Internet Explorer 7,^[15] Mozilla Firefox 2, Mozilla Firefox 3, Mozilla Firefox 4^[16] Opera and Safari. After it sends a TLS ClientHello, if Mozilla Firefox finds that the server is unable to complete the handshake, it will attempt to fall back to using SSL 3.0 with an SSL 3.0 ClientHello in SSL 2.0 format to maximize the likelihood of successfully handshaking with older servers.^[17] Support for SSL 2.0 (and weak 40-bit and 56-bit ciphers) has been removed completely from Operaas of version 9.5.^[18]

Modifications to the original protocols, like False Start (adopted and enabled by Google Chrome^[19] ) or Snap Start, have been reported to introduce limited TLS protocol version rollback attacks^[20] or to allow modifications to the cipher suite list sent by the client to the server(an attacker may be able influence the cipher suite selection in an attempt to downgrade the cipher suite strength, to use either a weaker symmetric encryption algorithm or a weaker key exchange^[21] ).

[edit]TLS handshake in detail

The TLS protocol exchanges records, which encapsulate the data to be exchanged. Each record can be compressed, padded, appended with a message authentication code (MAC), or encrypted, all depending on the state of the connection. Each record has a content type field that specifies the record, a length field and a TLS version field.

When the connection starts, the record encapsulates another protocol — the handshake messaging protocol — which has content type 22.

[edit]Simple TLS handshake

A simple connection example follows, illustrating a handshake where the server (but not the client) is authenticated by its certificate:

1. Negotiation phase:
   • A client sends a ClientHello message specifying the highest TLS protocol version it supports, a random number, a list of suggested CipherSuites and suggested compression methods. If the client is attempting to perform a resumed handshake, it may send a session ID.
   • The server responds with a ServerHello message, containing the chosen protocol version, a random number, CipherSuite and compression method from the choices offered by the client. To confirm or allow resumed handshakes the server may send a session ID. The chosen protocol version should be the highest that both the client and server support. For example, if the client supports TLS1.1 and the server supports TLS1.2, TLS1.1 should be selected; SSL 3.0 should not be selected.
   • The server sends its Certificate message (depending on the selected cipher suite, this may be omitted by the server).^[22]
   • The server sends a ServerHelloDone message, indicating it is done with handshake negotiation.
   • The client responds with a ClientKeyExchange message, which may contain a PreMasterSecret, public key, or nothing. (Again, this depends on the selected cipher.) This PreMasterSecret is encrypted using the public key of the server certificate.
   • The client and server then use the random numbers and PreMasterSecret to compute a common secret, called the "master secret". All other key data for this connection is derived from this master secret (and the client- and server-generated random values), which is passed through a carefully designed "pseudorandom function".
2. The client now sends a ChangeCipherSpec record, essentially telling the server, "Everything I tell you from now on will be authenticated (and encrypted if encryption parameters were present in the server certificate)." The ChangeCipherSpec is itself a record-level protocol with content type of 20.
   • Finally, the client sends an authenticated and encrypted Finished message, containing a hash and MAC over the previous handshake messages.
   • The server will attempt to decrypt the client's Finished message and verify the hash and MAC. If the decryption or verification fails, the handshake is considered to have failed and the connection should be torn down.
3. Finally, the server sends a ChangeCipherSpec, telling the client, "Everything I tell you from now on will be authenticated (and encrypted, if encryption was negotiated)."
   • The server sends its authenticated and encrypted Finished message.
   • The client performs the same decryption and verification.
4. Application phase: at this point, the "handshake" is complete and the application protocol is enabled, with content type of 23. Application messages exchanged between client and server will also be authenticated and optionally encrypted exactly like in their Finished message. Otherwise, the content type will return 25 and the client will not authenticate.

[edit]Client-authenticated TLS handshake

The following full example shows a client being authenticated (in addition to the server like above) via TLS using certificates exchanged between both peers.

1. Negotiation phase:
   • A client sends a ClientHello message specifying the highest TLS protocol version it supports, a random number, a list of suggested cipher suites and compression methods.
   • The server responds with a ServerHello message, containing the chosen protocol version, a random number, cipher suite and compression method from the choices offered by the client. The server may also send a session id as part of the message to perform a resumed handshake.
   • The server sends its Certificate message (depending on the selected cipher suite, this may be omitted by the server).^[22]
   • The server requests a certificate from the client, so that the connection can be mutually authenticated, using a CertificateRequest message.
   • The server sends a ServerHelloDone message, indicating it is done with handshake negotiation.
   • The client responds with a Certificate message, which contains the client's certificate.
   • The client sends a ClientKeyExchange message, which may contain a PreMasterSecret, public key, or nothing. (Again, this depends on the selected cipher.) This PreMasterSecret is encrypted using the public key of the server certificate.
   • The client sends a CertificateVerify message, which is a signature over the previous handshake messages using the client's certificate's private key. This signature can be verified by using the client's certificate's public key. This lets the server know that the client has access to the private key of the certificate and thus owns the certificate.
   • The client and server then use the random numbers and PreMasterSecret to compute a common secret, called the "master secret". All other key data for this connection is derived from this master secret (and the client- and server-generated random values), which is passed through a carefully designed "pseudorandom function".
2. The client now sends a ChangeCipherSpec record, essentially telling the server, "Everything I tell you from now on will be authenticated (and encrypted if encryption was negotiated)." The ChangeCipherSpec is itself a record-level protocol and has type 20 and not 22.
   • Finally, the client sends an encrypted Finished message, containing a hash and MAC over the previous handshake messages.
   • The server will attempt to decrypt the client's Finished message and verify the hash and MAC. If the decryption or verification fails, the handshake is considered to have failed and the connection should be torn down.
3. Finally, the server sends a ChangeCipherSpec, telling the client, "Everything I tell you from now on will be authenticated (and encrypted if encryption was negotiated)."
   • The server sends its own encrypted Finished message.
   • The client performs the same decryption and verification.
4. Application phase: at this point, the "handshake" is complete and the application protocol is enabled, with content type of 23. Application messages exchanged between client and server will also be encrypted exactly like in their Finished message. The application will never again return TLS encryption information without a type 32 apology.

[edit]Resumed TLS handshake

Public key operations (e.g., RSA) are relatively expensive in terms of computational power. TLS provides a secure shortcut in the handshake mechanism to avoid these operations. In an ordinary full handshake, the server sends a session id as part of theServerHello message. The client associates this session id with the server's IP address and TCP port, so that when the client connects again to that server, it can use the session id to shortcut the handshake. In the server, the session id maps to the cryptographic parameters previously negotiated, specifically the "master secret". Both sides must have the same "master secret" or the resumed handshake will fail (this prevents an eavesdropper from using a session id). The random data in theClientHello and ServerHello messages virtually guarantee that the generated connection keys will be different than in the previous connection. In the RFCs, this type of handshake is called an abbreviated handshake. It is also described in the literature as a restart handshake.

1. Negotiation phase:
   • A client sends a ClientHello message specifying the highest TLS protocol version it supports, a random number, a list of suggested cipher suites and compression methods. Included in the message is the session id from the previous TLS connection.
   • The server responds with a ServerHello message, containing the chosen protocol version, a random number, cipher suite and compression method from the choices offered by the client. If the server recognizes the session id sent by the client, it responds with the same session id. The client uses this to recognize that a resumed handshake is being performed. If the server does not recognize the session id sent by the client, it sends a different value for its session id. This tells the client that a resumed handshake will not be performed. At this point, both the client and server have the "master secret" and random data to generate the key data to be used for this connection.
2. The client now sends a ChangeCipherSpec record, essentially telling the server, "Everything I tell you from now on will be encrypted." The ChangeCipherSpec is itself a record-level protocol and has type 20 and not 22.
   • Finally, the client sends an encrypted Finished message, containing a hash and MAC over the previous handshake messages.
   • The server will attempt to decrypt the client's Finished message and verify the hash and MAC. If the decryption or verification fails, the handshake is considered to have failed and the connection should be torn down.
3. Finally, the server sends a ChangeCipherSpec, telling the client, "Everything I tell you from now on will be encrypted."
   • The server sends its own encrypted Finished message.
   • The client performs the same decryption and verification.
4. Application phase: at this point, the "handshake" is complete and the application protocol is enabled, with content type of 23. Application messages exchanged between client and server will also be encrypted exactly like in their Finished message.

Apart from the performance benefit, resumed sessions can also be used for single sign-on as it is guaranteed that both the original session as well as any resumed session originate from the same client. This is of particular importance for the FTP over TLS/SSL protocol which would otherwise suffer from a man in the middle attack in which an attacker could intercept the contents of the secondary data connections.^[23]

[edit]TLS record protocol

This is the general format of all TLS records.

Content type

This field identifies the Record Layer Protocol Type contained in this Record.

Content types

Hex	Dec	Type
0x14	20	ChangeCipherSpec
0x15	21	Alert
0x16	22	Handshake
0x17	23	Application

Version

This field identifies the major and minor version of TLS for the contained message. For a ClientHello message, this need not be the highest version supported by the client.

Versions

Major Version	Minor Version	Version Type
3	0	SSL 3.0
3	1	TLS 1.0
3	2	TLS 1.1
3	3	TLS 1.2

Length

The length of Protocol message(s), not to exceed 2¹⁴ bytes (16 KiB).

Protocol message(s)

One or more messages identified by the Protocol field. Note that this field may be encrypted depending on the state of the connection.

MAC and Padding

A message authentication code computed over the Protocol message, with additional key material included. Note that this field may be encrypted, or not included entirely, depending on the state of the connection.

No MAC or Padding can be present at end of TLS records before all cipher algorithms and parameters have been negotiated and handshaked and then confirmed by sending a CipherStateChange record (see below) for signalling that these parameters will take effect in all further records sent by the same peer.

[edit]Handshake protocol

Most messages exchanged during the setup of the TLS session are based on this record, unless an error or warning occurs and needs to be signalled by an Alert protocol record (see below), or the encryption mode of the session is modified by another record (see ChangeCipherSpec protocol below).

Message type

This field identifies the Handshake message type.

Message Types
Code	Description
0	HelloRequest
1	ClientHello
2	ServerHello
11	Certificate
12	ServerKeyExchange
13	CertificateRequest
14	ServerHelloDone
15	CertificateVerify
16	ClientKeyExchange
20	Finished

Handshake message data length

This is a 3-byte field indicating the length of the handshake data, not including the header.

Note that multiple Handshake messages may be combined within one record.

[edit]Alert protocol

This record should normally not be sent during normal handshaking or application exchanges. However, this message can be sent at any time during the handshake and up to the closure of the session. If this is used to signal a fatal error, the session will be closed immediately after sending this record, so this record is used to give a reason for this closure. If the alert level is flagged as a warning, the remote can decide to close the session if it decides that the session is not reliable enough for its needs (before doing so, the remote may also send its own signal).

Level

This field identifies the level of alert. If the level is fatal, the sender should close the session immediately. Otherwise, the recipient may decide to terminate the session itself, by sending its own fatal alert and closing the session itself immediately after sending it. The use of Alert records is optional, however if it is missing before the session closure, the session may be resumed automatically (with its handshakes).

Normal closure of a session after termination of the transported application should preferably be alerted with at least the Close notify Alert type (with a simple warning level) to prevent such automatic resume of a new session. Signalling explicitly the normal closure of a secure session before effectively closing its transport layer is useful to prevent or detect attacks (like attempts to truncate the securely transported data, if it intrinsically does not have a predetermined length or duration that the recipient of the secured data may expect).

Alert level types

Code	Level type	Connection state
1	warning	connection or security may be unstable.
2	fatal	connection or security may be compromised, or an unrecoverable error has occurred.

Description

This field identifies which type of alert is being sent.

Alert description types

Code	Description	Level types	Note
0	Close notify	warning/fatal
10	Unexpected message	fatal
20	Bad record MAC	fatal	Possibly a bad SSL implementation, or payload has been tampered with e.g. FTP firewall rule on FTPS server.
21	Decryption failed	fatal	TLS only, reserved
22	Record overflow	fatal	TLS only
30	Decompression failure	fatal
40	Handshake failure	fatal
41	No certificate	warning/fatal	SSL 3.0 only, reserved
42	Bad certificate	warning/fatal
43	Unsupported certificate	warning/fatal	E.g. certificate has only Server authentication usage enabled and is presented as a client certificate
44	Certificate revoked	warning/fatal
45	Certificate expired	warning/fatal	Check server certificate expire also check no certificate in the chain presented has expired
46	Certificate unknown	warning/fatal
47	Illegal parameter	fatal
48	Unknown CA (Certificate authority)	fatal	TLS only
49	Access denied	fatal	TLS only - E.g. no client certificate has been presented (TLS: Blank certificate message or SSLv3: No Certificate alert), but server is configured to require one.
50	Decode error	fatal	TLS only
51	Decrypt error	warning/fatal	TLS only
60	Export restriction	fatal	TLS only, reserved
70	Protocol version	fatal	TLS only
71	Insufficient security	fatal	TLS only
80	Internal error	fatal	TLS only
90	User cancelled	fatal	TLS only
100	No renegotiation	warning	TLS only
110	Unsupported extension	warning	TLS only
111	Certificate unobtainable	warning	TLS only
112	Unrecognized name	warning	TLS only; client's Server Name Indicator specified a hostname not supported by the server
113	Bad certificate status response	fatal	TLS only
114	Bad certificate hash value	fatal	TLS only
115	Unknown PSK identity (used in TLS-PSK andTLS-PSK)	fatal	TLS only

[edit]ChangeCipherSpec protocol

CCS protocol type

Currently only 1.

[edit]Application protocol

Length

Length of Application data (excluding the protocol header and the MAC and padding trailers)

MAC

20 bytes for the SHA-1-based HMAC, 16 bytes for the MD5-based HMAC.

Padding

Variable length ; last byte contains the padding length.

[edit]Support for name-based virtual servers

From the application protocol point of view, TLS belongs to a lower layer, although the TCP/IP model is too coarse to show it. This means that the TLS handshake is usually (except in the STARTTLS case) performed before the application protocol can start. The name-based virtual server feature being provided by the application layer, all co-hosted virtual servers share the same certificate because the server has to select and send a certificate immediately after the ClientHello message. This is a big problem in hosting environments because it means either sharing the same certificate among all customers or using a different IP address for each of them.

There are two known workarounds provided by X.509:

• If all virtual servers belong to the same domain, a wildcard certificate can be used. Besides the loose host name selection that might be a problem or not, there is no common agreement about how to match wildcard certificates. Different rules are applied depending on the application protocol or software used.^[24]
• Add every virtual host name in the subjectAltName extension. The major problem being that the certificate needs to be reissued whenever a new virtual server is added.

In order to provide the server name, RFC 4366 Transport Layer Security (TLS) Extensions allow clients to include a Server Name Indication extension (SNI) in the extended ClientHello message. This extension hints the server immediately which name the client wishes to connect to, so the server can select the appropriate certificate to send to the client.

[edit]Implementations

SSL and TLS have been widely implemented in several free and open source software projects. Programmers may use the CyaSSL, OpenSSL, NSS, or GnuTLS libraries for SSL/TLS functionality. Microsoft Windows includes an implementation of SSL and TLS as part of its Secure Channel package. Delphi programmers may use a library called Indy. Comparison of TLS Implementations provides a brief comparison of features of different implementations.

[edit]Browser implementations

All the most recent web browsers support TLS:

• Apple's Safari supports TLS, but it’s not officially specified which version.^[25] On Operating Systems(Safari uses the TLS implementation of the underlying Operating System) like Mac OS X 10.5.8, Mac OS X 10.6.6, Windows XP, Windows Vista or Windows 7, Safari 5 has been reported to support TLS 1.0.^[26]
• Mozilla Firefox, versions 2 and above, support TLS 1.0.^[27] As of June 2011, Firefox does not support TLS 1.1 or 1.2.^[28]
• Microsoft Internet Explorer always uses the TLS implementation of the underlying Microsoft Windows Operating System, a service called SChannel Security Service Provider. Internet Explorer 8 in Windows 7 and Windows Server 2008 R2 supports TLS 1.2. Windows 7 and Windows Server 2008 R2 use the same code (Microsoft Windows Version 6.1 (build 7600)) similar to how Windows Vista SP1 uses the same code as Windows 2008 Server.^[29]
• As of Presto 2.2, featured in Opera 10, Opera supports TLS 1.2.^[30]

[edit]Standards

The current approved version of TLS is version 1.2, which is specified in:

• RFC 5246: “The Transport Layer Security (TLS) Protocol Version 1.2”.

The current standard replaces these former versions, which are now considered obsolete:

• RFC 2246: “The TLS Protocol Version 1.0”.
• RFC 4346: “The Transport Layer Security (TLS) Protocol Version 1.1”.

Other RFCs subsequently extended TLS, including:

• RFC 2595: “Using TLS with IMAP, POP3 and ACAP”. Specifies an extension to the IMAP, POP3 and ACAP services that allow the server and client to use transport-layer security to provide private, authenticated communication over the Internet.
• RFC 2712: “Addition of Kerberos Cipher Suites to Transport Layer Security (TLS)”. The 40-bit cipher suites defined in this memo appear only for the purpose of documenting the fact that those cipher suite codes have already been assigned.
• RFC 2817: “Upgrading to TLS Within HTTP/1.1”, explains how to use the Upgrade mechanism in HTTP/1.1 to initiate Transport Layer Security (TLS) over an existing TCP connection. This allows unsecured and secured HTTP traffic to share the samewell known port (in this case, http: at 80 rather than https: at 443).
• RFC 2818: “HTTP Over TLS”, distinguishes secured traffic from insecure traffic by the use of a different 'server port'.
• RFC 3207: “SMTP Service Extension for Secure SMTP over Transport Layer Security”. Specifies an extension to the SMTP service that allows an SMTP server and client to use transport-layer security to provide private, authenticated communication over the Internet.
• RFC 3268: “AES Ciphersuites for TLS”. Adds Advanced Encryption Standard (AES) cipher suites to the previously existing symmetric ciphers.
• RFC 3546: “Transport Layer Security (TLS) Extensions”, adds a mechanism for negotiating protocol extensions during session initialisation and defines some extensions. Made obsolete by RFC 4366.
• RFC 3749: “Transport Layer Security Protocol Compression Methods”, specifies the framework for compression methods and the DEFLATE compression method.
• RFC 3943: “Transport Layer Security (TLS) Protocol Compression Using Lempel-Ziv-Stac (LZS)”.
• RFC 4132: “Addition of Camellia Cipher Suites to Transport Layer Security (TLS)”.
• RFC 4162: “Addition of SEED Cipher Suites to Transport Layer Security (TLS)”.
• RFC 4217: “Securing FTP with TLS”.
• RFC 4279: “Pre-Shared Key Ciphersuites for Transport Layer Security (TLS)”, adds three sets of new cipher suites for the TLS protocol to support authentication based on pre-shared keys.
• RFC 4347: “Datagram Transport Layer Security” specifies a TLS variant that works over datagram protocols (such as UDP).
• RFC 4366: “Transport Layer Security (TLS) Extensions” describes both a set of specific extensions and a generic extension mechanism.
• RFC 4492: “Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS)”.
• RFC 4507: “Transport Layer Security (TLS) Session Resumption without Server-Side State”.
• RFC 4680: “TLS Handshake Message for Supplemental Data”.
• RFC 4681: “TLS User Mapping Extension”.
• RFC 4785: “Pre-Shared Key (PSK) Ciphersuites with NULL Encryption for Transport Layer Security (TLS)”.
• RFC 5054: “Using the Secure Remote Password (SRP) Protocol for TLS Authentication”. Defines the TLS-SRP ciphersuites.
• RFC 5081: “Using OpenPGP Keys for Transport Layer Security (TLS) Authentication”, obsoleted by RFC 6091.
• RFC 5746: “Transport Layer Security (TLS) Renegotiation Indication Extension”.
• RFC 6091: “Using OpenPGP Keys for Transport Layer Security (TLS) Authentication“.
• RFC 6209: “Addition of the ARIA Cipher Suites to Transport Layer Security (TLS)”.

[edit]See also

Cryptography portal

• Virtual private network
• Comparison of TLS Implementations
• Datagram Transport Layer Security
• Multiplexed Transport Layer Security
• X.509
• Certificate authority
• Public key certificate
• Extended Validation Certificate
• SEED
• SSL acceleration
• Obfuscated TCP
• Server gated cryptography
• tcpcrypt
• Server Name Indication

[edit]Software

• OpenSSL: a free implementation (BSD license with some extensions), used by OpenVPN (GNU GPL)
• GnuTLS: a free implementation (LGPL licensed)
• cryptlib: a portable open source cryptography library (includes TLS/SSL implementation)
• JSSE: a Java implementation included in the Java Runtime Environment
• Network Security Services (NSS): FIPS 140 validated open source library
• PolarSSL: A tiny TLS implementation for embedded devices
• CyaSSL: Embedded SSL/TLS Library with a strong focus on speed and size.